Відео

For structural support I'm more towards metal, especially steel or aluminium. Because it is more light weight and sturdier than wood. One thing about wood is it breaks on impact, so it is also one of the reasons I don't recommend using wooden structure anymore, except for the tip. Pointy metal can be pretty dangerous

Thank you! I do hope to see more Ubel cosplay too!

You can do it!!

可以的，我目前都是收比较主流的道具为主

Thank you! It is called super effect red and it has to use a spray gun. There's a similar one called candy red in my area and it is a type of spray can paint

It is majorly made of 5mm foam. The details are 5mm, 10mm and some 2mm

其实可以尝试用yt自带的翻译系统，要打中文字幕要花的时间实在是太多了

@@LeonNoelCos 好的，之後再試著英翻中 之前在其他英語系頻道嘗試這樣翻過，效果不太好 變成還是有點半猜測去觀看(痛苦

Depends on what kind of paint you use. The shoe itself is pretty durable unless u ran with it, kick somebody with it, other than that, it will last pretty well

May I know which part are you referring to?

@@LeonNoelCos towards the middle, when crafting, you Dremel the edge and then use a bigger template off the axe to add details on top at 3:50 I couldn’t find this one in the template folder

You can refer back to the full axe template, I have indicated the red line is the base layer, while for the bigger part, can just simply extract from the full axe template

Yes absolutely!

@@LeonNoelCos Thank youuu! I purchased the pattern! Do you have an Instagram account where I can tag you once I finish the prop?

@@ceciliapeschiera4965 yes sure, @leon_noel_cos Feel free to ask me if you have any problems too

It should be quite standard for most hardware store. It is everywhere in my place. Have you tried your local hardware store?

Let me plan it

@@LeonNoelCos thanks king 👑

It is around 158cm

Yes, I use a slightly bigger pvc pipe, remove a part of it and it will act as a stopper

Thank you! Glad you like it

For the inner one, It is 2.2cm

There are millions of ways to do it though, I have a friend who has explosion knowledge on electrical stuffs and he is using premade led as well and it still works. So yeah, there's really no limit that you have to wire everything though

Legend says he watches my tutorial on my UA-cam channel and made one. Because that's what the hero himmel would've done

I use automobile paint. Which is similar to most common spray can paint

@@LeonNoelCos Is it okay if I use acrylic paint or regular paint for painting for eva foam?

@@jeremyyudiarta8757 yes absolutely

@@LeonNoelCos Thank you

You can try finding replacements like lantern and such, as long as the diameter is not too far from what I used here

@@LeonNoelCos I dont understand what kind of lantern is in that shape?

Because that's what the hero himmel would've done

@@LeonNoelCos indeed he would

Hence my tutorial is here to teach y'all 😌👌

Oh boy, how did you know my plan

@@LeonNoelCos well it's only logical at this point and I do like to see the series on that there's so many staff in there and I would love to see that 💖🥰

Honestly I can't give you the exact dimensions. But based on the standard size, general 5mm, 1m x 1m is more than enough. The rest like 2mm, 10mm can be smaller pieces, like 50cm x 50cm

@@LeonNoelCos thank you, thats a good estimate for me!

After you printed the template, you can actually refer to the template, as long as the scale is correct. You can refer to the 1cm reference cube first make sure the scale is correct, then measure the pvc pipe length from the template

Thanks for the feedback! I do appreciate feedback like this. I do always want to show a full view, however my backdrop is just too small. Am still saving my budget to upgrade a bigger one, hopefully in this year. For the music, do you mean the intro or during tutorial?

I can't recommend any other more accessible method than the rotary tool. That's because unlike wood, foam is considered a soft and bouncing material, so if sanding with normal sandpaper will take forever. Just get a rotary tool, even a cheap rotary tool will work

@@LeonNoelCos Thank you

​@@LeonNoelCos Also for wood, how do I make it look like sharp? Can I also use the sand rotary tool for it?

@@jeremyyudiarta8757 it is also possible

@@LeonNoelCos Thank you

Let me secretly plan it

Omg great job!! Being perfect isn't the point! Most important thing is you've made it through!

Thanks for the support! Hope it helps! Let me know if you have any problem with it too

That will be a lot more easy, simply just wrapped over the base

@LeonNoelCos thank you so much for replying! I'll try that

Good luck!

Even a master started from 0, maybe it's time

thank you Master!! @@LeonNoelCos

Good luck!

Me with everything though honestly

Me too, but I will certainly try bc I can't buy one haha

Thank you!

你好，谢谢你的喜欢 单子方面前阵子都忙其他的工作所以估计是看漏了，目前单子都随缘接，主要还是接主流的可以拍影片的武器为主

Thank you! Appreciate it

Thank you 😌

你好，感谢你的留言 制作蓝图方面需要对整个道具的分析和对材料和技术的运用有一定程度的了解才能制作一个完整的蓝图，我还需要一些时间来构思要如何让新手更容易踏进这个领域，因为这方面的技术都是成年累月的。未来我会考虑出一个制作蓝图和打板的基础影片

@@LeonNoelCos 好的感謝！🙏🏻

Thanks a lot!

Oh boy